I wonder if they have fixed the flexing problem & the copy paste problems

What kind of flexing problem is that?
The copy/paste by right-clicking in the Page manager has not yet been fixed.

how about "copy" just greing out more times during a project than I have had hot dinners which requires many closing/restarting more times than I have had cold beers! (on the whole project, not page manager)

Q= when is a wrap a no-wrap

A= When its in a container (within another container) using sdv3 any build??

see short video example

https://www.dropbox.com/s/hyw3qk8ex75j08p/when-is-a-wrap-a-no-wrap.zip?dl=0

how about "copy" just greying out more times during a project than I have had hot dinners which requires many closing/restarting more times than I have had cold beers! (on the whole project, not page manager)

see this thread
https://www.coffeecup.com/forums/site-d … cut-issue/

Does perhaps the container need to have a fixed height for flex column wrap to work properly?

Frank

Yes, a height is necessary.

Wayan, from your video I can see that the wrap/no wrap is working, but perhaps not the way you want it to work. When you select wrap, the header goes into one column, and the links into another. That leads me to think, that the links are inside another container.

See the attached file. The top sample is what I think must be your setup. I have limited the width of the .outer container and the height of the .inner one. You'll see that I have used a link container for all the links. Wrap/unwrap it, it behaves like yours.

The middle sample is without the link container, just the links in a column below the header. Doesn't look too god when wrapped.

The third one down is what I think you're after. The .inner3 is left with no-wrap, and then the wrapping happens in the link container. Better?

Wayan, from your video I can see that the wrap/no wrap is working, but perhaps not the way you want it to work. When you select wrap, the header goes into one column, and the links into another. That leads me to think, that the links are inside another container.

nope the header & links are in the same container
yes the wrap/no-wrap work, but the wrong way round

if I ask it for wrap the result is no-wrap (hence the header/links in a row (regardless of if the parent container has fixed or auto height.

if I ask for no-wrap the result is it wraps, hence the header & links appear as a column.

this can also happen if I put a container (main) in the body set the height to 100vh then add further containers/elements

set the container main to row = wrap it doesn't wrap and a horizontal scroll bar appears
set the container main to row = no-wrap it wraps them and the horizontal scrollbar disappears because now the elements are wrapped (even though I have asked for no-wrap)

Well, then I must have misunderstood something. To be able to follow you, I would have to see the source file.