I'm sure it's something stupid but I have a demo site here -
http://tippingproductions.com/tpc/demos … ities.html
When I set it up I used text edit mode - clicked the pencil - entered the info under URL - set it to Blank (Target) and apply. The phone links work but these don't seem to open correctly.
Anybody have any ideas?
Byron
Browser link - Post ID 282300
Byron Tipping
Registered User
1,647 posts
Eric Rohloff
Senior Advisor
20,271 posts
Hi Byron,
Some of your links start with te but should be tel
Some of your links start with te but should be tel
I can't hear what I'm looking at.
It's easy to overlook something you're not looking for.
This is a site I built for my work.(RSD)
http://esmansgreenhouse.com
This is a site I built for use in my job.(HTML Editor)
https://pestlogbook.com
This is my personal site used for testing and as an easy way to share photos.(RLM imported to RSD)
https://ericrohloff.com
It's easy to overlook something you're not looking for.
This is a site I built for my work.(RSD)
http://esmansgreenhouse.com
This is a site I built for use in my job.(HTML Editor)
https://pestlogbook.com
This is my personal site used for testing and as an easy way to share photos.(RLM imported to RSD)
https://ericrohloff.com
Byron Tipping
Registered User
1,647 posts
thanks Eric - saw that and correcting (and slowing down!)
its the links to fresh browser window with the sites that I can't figure out
Byron
its the links to fresh browser window with the sites that I can't figure out
Byron
Eric Rohloff
Senior Advisor
20,271 posts
You need the http:// on those link's href.
I can't hear what I'm looking at.
It's easy to overlook something you're not looking for.
This is a site I built for my work.(RSD)
http://esmansgreenhouse.com
This is a site I built for use in my job.(HTML Editor)
https://pestlogbook.com
This is my personal site used for testing and as an easy way to share photos.(RLM imported to RSD)
https://ericrohloff.com
It's easy to overlook something you're not looking for.
This is a site I built for my work.(RSD)
http://esmansgreenhouse.com
This is a site I built for use in my job.(HTML Editor)
https://pestlogbook.com
This is my personal site used for testing and as an easy way to share photos.(RLM imported to RSD)
https://ericrohloff.com
Byron Tipping
Registered User
1,647 posts
I tried that but maybe fat-fingered it
Will try again
Thanks Eric
Will try again
Thanks Eric
Inger
Senior Advisor
14,647 posts
Online Now
I don't think an absolute URL is necessary. All the Demo links on my sharing site are just relative links, and they work fine opening a blank page. My demo index files are in separate folders, but not even that is important, I have tried moving one or two into the same folder as the main index file (changing the name, though), and that works too.
Ha en riktig god dag!
Inger, Norway
My work in progress:
Components for Site Designer and the HTML Editor: https://mock-up.coffeecup.com
Inger, Norway
My work in progress:
Components for Site Designer and the HTML Editor: https://mock-up.coffeecup.com
Eric Rohloff
Senior Advisor
20,271 posts
Inger wrote:
I don't think an absolute URL is necessary. All the Demo links on my sharing site are just relative links, and they work fine opening a blank page. My demo index files are in separate folders, but not even that is important, I have tried moving one or two into the same folder as the main index file (changing the name, though), and that works too.
I don't think an absolute URL is necessary. All the Demo links on my sharing site are just relative links, and they work fine opening a blank page. My demo index files are in separate folders, but not even that is important, I have tried moving one or two into the same folder as the main index file (changing the name, though), and that works too.
Off site links always need to be absolute.
I can't hear what I'm looking at.
It's easy to overlook something you're not looking for.
This is a site I built for my work.(RSD)
http://esmansgreenhouse.com
This is a site I built for use in my job.(HTML Editor)
https://pestlogbook.com
This is my personal site used for testing and as an easy way to share photos.(RLM imported to RSD)
https://ericrohloff.com
It's easy to overlook something you're not looking for.
This is a site I built for my work.(RSD)
http://esmansgreenhouse.com
This is a site I built for use in my job.(HTML Editor)
https://pestlogbook.com
This is my personal site used for testing and as an easy way to share photos.(RLM imported to RSD)
https://ericrohloff.com
Inger
Senior Advisor
14,647 posts
Online Now
Yes, of course. But the only link I could find with the target blank was to the contact page, and that wasn't off site.
Ha en riktig god dag!
Inger, Norway
My work in progress:
Components for Site Designer and the HTML Editor: https://mock-up.coffeecup.com
Inger, Norway
My work in progress:
Components for Site Designer and the HTML Editor: https://mock-up.coffeecup.com
Eric Rohloff
Senior Advisor
20,271 posts
I think most internal links should open in the same window. The only ones that might not would be links to documents or pages that have no menu or links on them. I think all off site links should open in a new tab or window. It's my opinion but I don't see any reason to let users navigate off your site to a different one and need to hit the back button who knows how many times.
I can't hear what I'm looking at.
It's easy to overlook something you're not looking for.
This is a site I built for my work.(RSD)
http://esmansgreenhouse.com
This is a site I built for use in my job.(HTML Editor)
https://pestlogbook.com
This is my personal site used for testing and as an easy way to share photos.(RLM imported to RSD)
https://ericrohloff.com
It's easy to overlook something you're not looking for.
This is a site I built for my work.(RSD)
http://esmansgreenhouse.com
This is a site I built for use in my job.(HTML Editor)
https://pestlogbook.com
This is my personal site used for testing and as an easy way to share photos.(RLM imported to RSD)
https://ericrohloff.com
Have something to add? We’d love to hear it!
You must have an account to participate. Please Sign In Here, then join the conversation.
